”;
In this chapter, we will discuss in detail about system logging in Unix.
Unix systems have a very flexible and powerful logging system, which enables you to record almost anything you can imagine and then manipulate the logs to retrieve the information you require.
Many versions of Unix provide a general-purpose logging facility called syslog. Individual programs that need to have information logged, send the information to syslog.
Unix syslog is a host-configurable, uniform system logging facility. The system uses a centralized system logging process that runs the program /etc/syslogd or /etc/syslog.
The operation of the system logger is quite straightforward. Programs send their log entries to syslogd, which consults the configuration file /etc/syslogd.conf or /etc/syslog and, when a match is found, writes the log message to the desired log file.
There are four basic syslog terms that you should understand −
| Sr.No. | Term & Description |
|---|---|
| 1 |
Facility The identifier used to describe the application or process that submitted the log message. For example, mail, kernel, and ftp. |
| 2 |
Priority An indicator of the importance of the message. Levels are defined within syslog as guidelines, from debugging information to critical events. |
| 3 |
Selector A combination of one or more facilities and levels. When an incoming event matches a selector, an action is performed. |
| 4 |
Action What happens to an incoming message that matches a selector — Actions can write the message to a log file, echo the message to a console or other device, write the message to a logged in user, or send the message along to another syslog server. |
Syslog Facilities
We will now understand about the syslog facilities. Here are the available facilities for the selector. Not all facilities are present on all versions of Unix.
| Facility | Description |
|---|---|
| 1 |
auth Activity related to requesting name and password (getty, su, login) |
| 2 |
authpriv Same as auth but logged to a file that can only be read by selected users |
| 3 |
console Used to capture messages that are generally directed to the system console |
| 4 |
cron Messages from the cron system scheduler |
| 5 |
daemon System daemon catch-all |
| 6 |
ftp Messages relating to the ftp daemon |
| 7 |
kern Kernel messages |
| 8 |
local0.local7 Local facilities defined per site |
| 9 |
lpr Messages from the line printing system |
| 10 |
Messages relating to the mail system |
| 11 |
mark Pseudo-event used to generate timestamps in log files |
| 12 |
news Messages relating to network news protocol (nntp) |
| 13 |
ntp Messages relating to network time protocol |
| 14 |
user Regular user processes |
| 15 |
uucp UUCP subsystem |
Syslog Priorities
The syslog priorities are summarized in the following table −
| Sr.No. | Priority & Description |
|---|---|
| 1 |
emerg Emergency condition, such as an imminent system crash, usually broadcast to all users |
| 2 |
alert Condition that should be corrected immediately, such as a corrupted system database |
| 3 |
crit Critical condition, such as a hardware error |
| 4 |
err Ordinary error |
| 5 |
Warning Warning |
| 6 |
notice Condition that is not an error, but possibly should be handled in a special way |
| 7 |
info Informational message |
| 8 |
debug Messages that are used when debugging programs |
| 9 |
none Pseudo level used to specify not to log messages |
The combination of facilities and levels enables you to be discerning about what is logged and where that information goes.
As each program sends its messages dutifully to the system logger, the logger makes decisions on what to keep track of and what to discard based on the levels defined in the selector.
When you specify a level, the system will keep track of everything at that level and higher.
The /etc/syslog.conf file
The /etc/syslog.conf file controls where messages are logged. A typical syslog.conf file might look like this −
*.err;kern.debug;auth.notice /dev/console daemon,auth.notice /var/log/messages lpr.info /var/log/lpr.log mail.* /var/log/mail.log ftp.* /var/log/ftp.log auth.* @prep.ai.mit.edu auth.* root,amrood netinfo.err /var/log/netinfo.log install.* /var/log/install.log *.emerg * *.alert |program_name mark.* /dev/console
Each line of the file contains two parts −
-
A message selector that specifies which kind of messages to log. For example, all error messages or all debugging messages from the kernel.
-
An action field that says what should be done with the message. For example, put it in a file or send the message to a user”s terminal.
Following are the notable points for the above configuration −
-
Message selectors have two parts: a facility and a priority. For example, kern.debug selects all debug messages (the priority) generated by the kernel (the facility).
-
Message selector kern.debug selects all priorities that are greater than debug.
-
An asterisk in place of either the facility or the priority indicates “all”. For example, *.debug means all debug messages, while kern.* means all messages generated by the kernel.
-
You can also use commas to specify multiple facilities. Two or more selectors can be grouped together by using a semicolon.
Logging Actions
The action field specifies one of five actions −
-
Log message to a file or a device. For example, /var/log/lpr.log or /dev/console.
-
Send a message to a user. You can specify multiple usernames by separating them with commas; for example, root, amrood.
-
Send a message to all users. In this case, the action field consists of an asterisk; for example, *.
-
Pipe the message to a program. In this case, the program is specified after the Unix pipe symbol (|).
-
Send the message to the syslog on another host. In this case, the action field consists of a hostname, preceded by an at sign; for example, @tutorialspoint.com.
The logger Command
Unix provides the logger command, which is an extremely useful command to deal with system logging. The logger command sends logging messages to the syslogd daemon, and consequently provokes system logging.
This means we can check from the command line at any time the syslogd daemon and its configuration. The logger command provides a method for adding one-line entries to the system log file from the command line.
The format of the command is −
logger [-i] [-f file] [-p priority] [-t tag] [message]...
Here is the detail of the parameters −
| Sr.No. | Option & Description |
|---|---|
| 1 |
-f filename Uses the contents of file filename as the message to log. |
| 2 |
-i Logs the process ID of the logger process with each line. |
| 3 |
-p priority Enters the message with the specified priority (specified selector entry); the message priority can be specified numerically, or as a facility.priority pair. The default priority is user.notice. |
| 4 |
-t tag Marks each line added to the log with the specified tag. |
| 5 |
message The string arguments whose contents are concatenated together in the specified order, separated by the space. |
You can use Manpage Help to check complete syntax for this command.
Log Rotation
Log files have the propensity to grow very fast and consume large amounts of disk space. To enable log rotations, most distributions use tools such as newsyslog or logrotate.
These tools should be called on a frequent time interval using the cron daemon. Check the man pages for newsyslog or logrotate for more details.
Important Log Locations
All the system applications create their log files in /var/log and its sub-directories. Here are few important applications and their corresponding log directories −
| Application | Directory |
|---|---|
| httpd | /var/log/httpd |
| samba | /var/log/samba |
| cron | /var/log/ |
| /var/log/ | |
| mysql | /var/log/ |
”;